Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I started 2024 with a goal to upgrade as many non-managed switches to Meraki managed switches. Didn't quite get as far as wanted. 2025 hopefully can be the year I get a lot more done on that front. Biggest hurdle for me though, is just time.
Well I found a solution that worked for me. I wouldn't call it elegant, but at least it was effective. During my normal maintenance window, I put the new MX in production, and took out the NATs I had defined. Had to remove the NATs temporarily due...
I personally would LOVE a connectivity reporting page with info on all WAN connections. I currently use the MSP Portal Overview with the map, on a browser with a 4min 59second refresh on my wall of monitors (along with weather and another monitoring...
Wow, almost a decade down the road and this is still a problem. I only have a 2 hour window normally. I've ask the ISP to clear the cache, but for some reason that didn't work either. It took almost 24 hours for a test setup to work, my production...
I may have found out something about the 1:1 NAT. Apparently the 1:1 NAT will not even try to work if the destination is not in the ARP table of the Meraki. And, in my case the destination device didn't seem to fill the ARP table in my short testin...