thank for the tuto ...
...but i still didn't manage to make it work
I have a AP cisco aironet 3600 and a Netgear M5300-28g
In the netgear i have some VLAN, in particular : vlan 1 = default, vlan 300 = Group, Vlan 301 = Client. I also have a DHCP include who's procure IP to each vlan.
It's connected to the AP on port 20 on giga (it's config in trunk mode like you say)
i'd like to diffuse 2 SSID one for each vlan on the AP so i create the 3 vlan with their encryption (like you say) and 3 SSID (one nativ and 2 on multi Beacon), the network interface Dot1radio X are also in place.
In the end i can see the SSIDs and connect on static ip but the DHCP doesn't work.
I know there is some command for the DHCP like "dhcp-server" or "dhcp-relay" but despise all my test it's still doesn't work .
I could use some help please.
P.S. I'm a frenchie so please forgive my langage's mistake
... View more