About jon13

jon13 · 03-27-2018

Hello,Is it possible for a Client VPN user to use split tunneling with their connection to a MX device?Thanks, Jon

jon13 · 02-21-2018

Hello all,I have a 1921 (MPLS) Router with G0/0 and G0/1, each interface is connected to an MX100 in a HA pair. I also have each MX100 connected to an internet link with Auto VPN enabled. If the Master in the HA pair goes down, How will my MPLS traff...

jon13 · 11-17-2017

After enabling Client VPN and adding a subnet, do I have to configure a DHCP pool for the VPN users?Or is this automagicly done?

jon13 · 05-15-2018

The PowerShell script is working on Windows 10 machines. Win 7 doesn't recognize the add-vpnconnection command. Do I need to add a module to PowerShell? I am running as Administrator. Or is there a different script for Win 7 machines?Thanks, jon1

jon13 · 04-30-2018

PhilipDAth,Thanks for the link. I'm using the VPN setup script and it is working great. Questions:1) If I use Meraki cloud authentication do I need the -DNSSuffix "[insert domain name]"? What is this for?2) Meraki's documentation says to select "Requ...

jon13 · 03-27-2018

Found the answer myself. Look here.https://documentation.meraki.com/MX-Z/Client_VPN/Configuring_Split-tunnel_Client_VPN

jon13 · 02-22-2018

Thank you PhilipDAth, great suggestions!

jon13 · 01-03-2018

Update: I contacted support and after 2 1/2 hours they determined the device was faulty. Meraki shipped a new device overnight with an RMA label. I made a test network and added the new device to that network. With the new device, I connected it as D...

Member Since	‎11-17-2017 12:14 PM
Date Last Visited	‎03-28-2026 01:07 AM
Posts	9
Total Helpful Votes Received	1

User Statistics

User Activity

Client VPN split tunneling?

1921 MPLS router to a HA pair of MX100s

Client VPN Pool?

Re: Client VPN split tunneling?

Re: Client VPN split tunneling?

Re: Client VPN split tunneling?

Re: 1921 MPLS router to a HA pair of MX100s

Re: MX100 Cannot online