Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a site with 9 cameras that are all on VLAN 20.I just recently acquired a static IP from Comcast and applied to our firewall. 7 of the cameras switched over just fine, but two of them (MV72's) aren't grabbing the proper Public IP and won't con...
I have implemented a Meraki wireless LAN at our location.SSID is set to PSK and WPA2I'm in NAT mode with no splash page.Everything is in DHCP.Everything connects seamlessly except for the Sharp MX-C304W and the two HP LaserJet Pro MFPs.auth_mode='wpa...
Cameras are no longer showing alerting, so I think for now the situation is resolved.It's strange that at our other sites we have outdoor cameras on VLAN20 that aren't in range of an AP and they are working fine.I appreciate all your help!
Finally got the Sharp Copier to connect to the wireless network.The issue was a domain field buried deep in the copier that had an incorrect name in it. Removed that and it connected right away.