Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am a bit of a noob here, but I have 2 switch stacks; an MS390 stack as our core, and an MS250 access stack. In looking between them, I noticed that the core stack(MS390) had the same management IP on both switches, while the Access stack(MS250) ha...
We currently have a core switch stack made up of 3 aging 24port 3870s. We wanted to install 2 MS390-48s in a stack, and move our core switch functionality over to the new MS390 stack. I am having a hard time finding documentation showing me how to ...
Can't avoid. they are what we have, so we'll have to see how it goes and make the best of it. I have been going over the current core config with a fine-toothed comb, so I can replicate as much as possible on the Meraki stack. The only issue is the...
In our current 3850 stack, we have a number of VLANs defined, login to the stack is via RSA(my understanding is that on Meraki, we need to use Duo), have a number of Port-channels defined as links to wiring closets, has some static routes defined, an...
I also found it:The Start date is from date of delivery (co-term) or up to 90 days after delivery (per-device), but no later than the claim date All licenses expire at the same time as opposed to unique license periods/device
So, for example, I have 3 VLANS called VLAN 100, 140 & 150, with IP addresses of 172.28.100.x, 172.28.140.x & 172.28.150.x. My DHCP server is in VLAN 51 at 172.28.51.x, and the switch is on mgmt VLAN 31 or 172.28.31.x. For the Routing and DHCP, do ...
