Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, Question about the WAN appliance services on MX devices. I have an MX 67 that is answering login requests on the WAN port. As far as I can tell the MX is configured to not answer those requests, however port 443 is publicly open to connection ...
The NAT Exceptions with Manual Inbound Firewall opt in is disabled. I'll call support to find out about the legacy backend option.Thanks very much for your quick responses!!
Entering the WAN IP in a browser results in the appliance details page and a login prompt when clicking on the configure button. Exactly the same as you would expect when connecting to the MX via IP on the locally connected network. The MX config pa...
Ensure you run updates for both win 10 and 11 in their entirey, to the point that when you check for updates the message received is "Your all up to date". Then follow instructions here: Client VPN Overview - Cisco MerakiThat is the process I have be...
I have tested this on a system with KB5009566 installed, I used a version of the IKEEXT.DLL file dated 11/15/2021.Booted the system with Hiren's and overwrote the dll dated 1/12/2022. Rebooted, tested VPN and works no issue. Not a practical solution ...
