Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Why is BGP MEd always applied outbound ? Consier a topolgy,
Site 1 ------------link1-----------Site 2
------------link 2 --------------
In real world for site 1 to chose link 1 over link 2 using med, site 2 would construct policy usin...
Hi,
Please refer to the attached image. I have configured aggregation on switch2 but for some add reason the subnets which is part of the supernet do not show up as suppressed eith locally.
on swicth2 or on swicth4. Shared below is the output from sw...
Help sought in route map processing. Please consider the scenario below :
R1 -------R2 , eBGP peering
Route on R1
BGP routing table entry for 10.220.140.0/22, version 3Paths: (1 available, best #1, table default)Not advertised to any peerRefresh E...
Hello,I was experimenting with route-map with continue clause, however the use of continue clause does not set well with my understanding of its processing. 1. A route matches a match statement execute its configured set values and then jumps to ...
Hi,I am trying to get my head around best route selection but I couldn't get my head around it.BGP routing table entry for 99.94.160.21:100:99.99.99.0/24, version 193064
BGP Bestpath: deterministic-med
Multipath: eBGP iBGP
763 4755 6453 2914 42 1928...
Hello,I have gone through the shared link. From the website:The lack of support for continue clause was somewhat expected after reading the relevant IOS documentation, and without the continue clause it makes no sense using set community additive in ...
Hi Paul,Thanks for your feedback. FYI - TAGs don’t work with route-map redistribution into bgp, Communities are the equivalent.I have another E2 route on Core , 192.168.1.0 with a TAG of 2000 and it matched seq 10 for redistributed into BGP.Core#show...
