Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This switch was inherited from someone with some problems. It is currently suck in the boot loader and according to the bootflash it is on version nxos.7.0.3.I7.5a.binI have tried a slew of nxos versions, older and newer and cannot get this to boot p...
Is there a way to copy the nx-os image to the bootflash from the ACI (none)# prompt using tftp? Looks like I can copy but it isn't working for tftp. I think that might work better than reloading, then going back through all of this hoping it tftp boo...
Holy crap I was able to get it going.I think I may have copied the bin files too many times or something but I used a fresh ios bin file for an aci image and it took the tftp boot.I am not running the most basic and oldest aci imagine cisco has for t...
I am reading a 0x52 postcode for the show postcode command in the loader. Seems to be pointing to a memory issue according to google. Is there something I can do to initialize the memory? Besides those three commands I keep running.
So last week I was able to get it to boot to an older ACI bin file and was very surprised. I played around with it and then tried to get it to go to nexus and sadly it did not.Now I am unable to remember how I exactly even got it to go back into ACI ...
I tried booting a nxos version and an ACI and got this same error:File system type is ext2fs, partition type 0x83ACI ChassisTying to read config file /boot/grub/menu.lst.local from (hd0,4)File system is ext2fs, partition type 0x83Booting auto-kTring ...