Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings All,So here's what I think I should do to give email access only to a segment of addresses of my inside network.1) Create a network object for 62 machines that will represent my dhcp clients. I plan to use 192.168.0.65-192.168.0.126. So I w...
Hi All,I'm a total noob trying to configure our ASA 5505 (hence my request for help with the ASDM). However, I can go CLI if push comes to shove.What I'm trying to do is allow a range of IP addresses on the inside interface (those which the DHCP serv...
Hi Everyone,I'm new to all this so please bear with me.I'm trying to configure, for the first time, my ASA 5505.I can connect to the device with the default settings but I cannot configure the device to perform it's role in our network.I've changed t...
Brendan,Yes, this helps a lot.After a little research of my own and your post, I now know that I need to set the "Default Route".Do you know how I can set the default route through the ADSM? I know that my gateway (IP address of the DSL router/modem)...
Brendan,Thanks so much for your replies.My main problem is that I do not know how to correctly get the ASA to speak to the DSL modem and therefore the internet. I know that the IP address that the DSL modem assigns to the ASA is 69.XXX.XX.242(when th...
Allen, This helped immensely. The wizard was working properly...well almost. What it wasn't doing was turning on the dhcp server...I guess that command never made it through. So when I set the IP of my host manually, I was able to connect and save th...
