Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,I have a Cisco Nexus 3048TP that was running NX-OS 6.0(2)U3(4) and was working normally.I attempted to upgrade it to NX-OS 6.0(2)U6(10) using:install all kickstart bootflash:n3000-uk9-kickstart.6.0.2.U6.10.bin system bootflash:n3000-uk9....
Thanks for the suggestion. I’ve actually been looking into the USB boot/recovery approach, but currently I’m getting a completely blank console with no output at all.I also found Cisco Field Notice FN74096, which seems to match my situation. It menti...
After the upgrade completed, I got the “Finished” status, and the switch automatically rebooted. I waited for about 5 minutes, but there was no boot output or NX-OS loading process. The console remained at the screen shown in the screenshot I provide...
What I meant is that there was no output coming from the switch itself. The console connection was active, but there was no POST, bootloader, or NX-OS boot process displayed, even after waiting for more than an hour.
