Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Jan,are you connecting with keyboard & monitor? If so, you will not see the complete bootup. You need to connect through the console port (and use a terminal emulator such as hyperterm) in order to see the complete bootup.Regards,Scott
Hi Chris,take a look at the 4.2.3 Release Notes:http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v423/release/notes/ws423xrn.html#wp43326This details the supported versions of WAAS that you can downgrade to. In your case, the later 4.1.5x...
Unless you are running a http or ftp server on your laptop, you will need to manually ftp the image to every WAAS device.First, enable ftp on the WAE devices via config mode on the CLI: inetd enable ftpYou can then ftp to each of your WAE devices...
Hi Richard,the software file URL (http or ftp) is the location on your network where you will be placing the upgrade *.bin file. Once you download the *.bin file from CCO, you can place the file on an internal http server or ftp server.Example for h...
