Thanks for a detailed explanation. Below are few points i would like to mention:1) If you hook one isp on say pix outside interface and the other isp on say dmz interface of pix but due to the fact that pix can have only one default route with same m...

Hi,Here are wo different static statements:1) static (inside,outside) x.x.x.x y.y.y.y netmask 255.255.255.2552) static (inside,outside) tcp interface 80 y.y.y.y 80 netmask 255.255.255.255Here, x.x.x.x = Your public (pix outside interface) ip address....

Hi Ta,Yes, you need to install pdm version 3.x... 3.0(4) is the latest available on download site.Depending up on the contract your customer would be having a Cisco.com (CCO) UserID. Now again it depends on the privilege level of the Cisco.com UserID...

Hi Eddie,Hope you are not doing port forwarding to implement dns doctoring using alias command.Secondly,make sure fixup for dns max length is set to 1500 and not disabled.Can you provide with the following information:1) "show tech" form pix without ...

Hi Ta,I checked with the attachments and the show version on your pix and here are few things i would like to bring to your notice that you are running incompatible version of PDM with your Pix OS. Compatibility is as follows:Pix OS 6.0 & 6.1 --> PDM...