Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
First find out what is the exact PCR and SCR from your telco in kbps (not cells/sec). Currently you have configured both the PCR and SCR to 280kbps. If you are exceeding the telco restricted bandwith then change your vbr-nrt statement in the config...
Well theoretically a clear channel T1 means the ability to provide a 64kb/s DS-0 for the customer. What I meant in this particular context is that there is no restriction from telco as far as what to configure on the T1s and how many channels to use...
Yes as long as they are point to point clear channel T1s with no telco restrictions about what to configure then you can treat theT1s between the two ima interfaces as back to back links regardless of who is providing the T1s. Now from service point ...
You can use the show atm vc command on a router to give you the configured parameters or the more specific show atm pvc /. If you have not configured any traffic shaping then the default is UBR and its the port speed. As opposed to Frame-Relay which ...
