Hey Henrik,Yeah I have a problem uploading from within fatrat bit torrent client.... I can download but can't upload.As I said the connections to port :3, are coinciding with opening fatrat. As far as the configuration is concerned it looks fine to y...

I have downgraded to c870-advipservicesk9-mz.124-20.T3.bin as per the suggestion from this thread https://supportforums.cisco.com/thread/2089462 and this has resolved problem 1, with http inspection enabled all traffic is working as expected.I will t...

Hi ya,What are your core switches at both sites? Do you have 3550's at both sites? If so I wouldn't be terminating the MPLS onto the PIX's you can terminate them directly onto the core switch (if you have layer 3 switches) using gre tunnels. This wil...

you've got the access-group inbound stated again down the bottom to the wrong interface again.Save the config (wr mem) and have a look at it on the pix - does it come up with:access-group outbound in interface inside access-group inbound in interface...

ok you have these around the wrong way:access-group outbound in interface outside access-group inbound in interface inside Remove them and add them as:access-group outbound in interface inside access-group inbound in interface outside