Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We need to migrate our ASA from a T1 router internet connection to a DS3 router internet connection. Both routers and the ASA are connected to a switch. The ASA is currently configured and operating with a 1.1.1.0/25 IP range. The DS3 has a 2.2.2.0/2...
I am using DNS rewrite to access my web server:static (Web,Outside) 63.77.38.7 10.30.10.10 netmask 255.255.255.255 dns ping testweb.3abn.orgThis works on my web interface. How do I access the same web server with DNS rewrite from the other four inter...
Yes, I am a newbie... I have the initial configuration of the ASA5520 finished and started adding some ACL. I can access lower security levels just fine but I want everybody to be able to ping everybody else. I tried:icmp permit 0.0.0.0 0.0.0.0 insid...
I have exactly the same problem and no one seems to understand. I asked about this a while ago and received no useful ideas. I have seen others ask similar questions before with no useful help ever recorded. I know this isn't any help beyond an affir...
Your advice seems helpful but I am afraid that I am a software engineer trying to do the work of a network administrator. I have a general understanding of what you are describing but I need some details to implement it.First it seems that if I want ...
The ASA 5520 is using 7.0(6) so apparently this should work correctly. I am only just completing my initial install so I am not sure if things are set up correctly. In particular I was wondering if I should be running DNS inspection for this to work...
This will take a lot of ACL because I have 5 interfaces but if that is what it takes to get the job done then that is what I need to do.It appears that with this method I don't need ICMP state inspection. I suspect that removing it reduces the CPU bu...
