About steve_kent

steve_kent · 04-27-2007

I am setting up Web Access for mail and I need open port 443 to inbound traffic for HTTPS (SSL-secured HTTP); port 993 to inbound traffic for SSL-secured IMAP; port 995 to inbound traffic for SSL-secured POP and port 25 to inbound traffid for SMTP.I ...

steve_kent · 04-27-2007

No I checked and there are no deny statement in my access-list 101

steve_kent · 04-27-2007

THe 150.1.X.X has been used for internal for over 6 years now. Our chief here didn't want to change it because there would be a very very slight possibility of running into a conflict with the internet address in Japan. That decision was way above my...

steve_kent · 04-27-2007

so does this look right for the differnet protocols?access-list 101 permit tcp any host eq smtpaccess-list 101 permit tcp any host eq smtpaccess-list 101 permit tcp any host eq httpsaccess-list 101 permit tcp any host eq imap4access-list 101 perm...

steve_kent · 04-27-2007

Yes I see it now:pixfirewall# show staticstatic (inside,outside) 0 0static (inside,outside) netmask 255.255.255.255 0 0static (inside,outside) netmask 255.255.255.255 0 0static (inside,outside) netmask 255.255.255.255 0 0static (inside,outsi...

steve_kent · 04-27-2007

OK I will give it a try ... but my web access server is not the same as the other smtp server. but I didn't see anything in my start configuration that actually identified a specific machine for smtp traffic

Member Since	‎04-27-2007 07:00 AM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	6

User Statistics

User Activity

Configuring Web Access on PIX 515E

Re: Configuring Web Access on PIX 515E

Re: Configuring Web Access on PIX 515E

Re: Configuring Web Access on PIX 515E

Re: Configuring Web Access on PIX 515E

Re: Configuring Web Access on PIX 515E