Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I have an ASA5520 with a /24 public network on the internal interface and /28 public network on the outside interface.You guys kindly helped me with a routing problem last week - I am almost there but now have this problem:My test PC on the i...
Hi Guys,I have an ASA5520 with an interface to the internet on a /28 public network and an interface to a /24 public network - I will connect other interfaces to other networks in time, but I just want to get the thing working for now.Anyway, I have ...
Hi Acomiskey,Yup - turns out it was the ISP at fault. Yes I didn't need the added line to get access - although everything bar web is working!Thanks,Niall.
Hi, Thanks for your reply.I can connect via other ports ie dns, ping, smtp etc - but web pages will not load.Also, I can see the TCP 80 connection building in the syslog and then teardown almost imediately.Also, as I am connecting from another public...
Just a quick update - It seems the whole problem was my ISP - they had not loaded the routes for the network on the inside interface (customer) - I can now ping etc.However, I have remove all the rules from the ASDM so that there is just the defualt ...
Thanks for the help again.OK - I have re-run the setup wizard, tested, played around with changing the security levels so the wan was lower then the customer interface and still nothing. removed and readded acls etc. still nothing.I have a theory:I w...
Yes Aurix01-s1 is my test box and is what I am trying to ping, web browse etc from.I opened it wide open for testing to try to see if the problem was acl related.To re-cap, I can ping anywhere from the ASA and I can see the ICMP or dns build and tear...
