About patternnetwork

patternnetwork · 09-11-2008

I am new to firewalling and have a PIX501 that has been setup and running for awhile now without any problems. But I now need to get the PIX to allow a new port number through. How do I do this?I tried adding:access-list 101 permit tcp any host xxx...

patternnetwork · 08-06-2007

I'm very new to PIX but can't get something to work. We have a T1 line that connects to the PIX and then we have the PIX connected to the external network on a Small Business Server 2003. I am trying to put in a wireless access point so guests can ...

patternnetwork · 09-11-2008

Yep that worked. My outside tech was able to connect through port 3389.Thanks, your a life saver.Mike

patternnetwork · 09-11-2008

Oh, so your saying it can be there but the line for the 3389 port needs to be above the deny line? And by removing it and then re-adding it it should place the deny line at the bottom?

patternnetwork · 09-11-2008

So if I enter:"no access-list 101 deny ip any any log"that will work? Will doing this affect anything else?Thank you

patternnetwork · 09-11-2008

Ok, I just had my outside tech try it and it didnt work. She said it might be a problem with the server instead, so from what you see, it looks like this firewall should be allowing incoming connections from everyone on port 3389, right? Is there a...

patternnetwork · 09-11-2008

Please help. I'm having a hard time understanding the terminology here and I am afraid of making changes and locking everyone out or blocking my users access out.Mike

Member Since	‎08-06-2007 11:00 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	21

User Statistics

User Activity

Allow Port 3389 on PIX501 Firewall

How to Setup PIX501

Re: Allow Port 3389 on PIX501 Firewall

Re: Allow Port 3389 on PIX501 Firewall

Re: Allow Port 3389 on PIX501 Firewall

Re: Allow Port 3389 on PIX501 Firewall

Re: Allow Port 3389 on PIX501 Firewall