About dmcdowall

dmcdowall · 08-08-2007

Hi,I have a PIX 515 with two interfaces, inside (10.0.0.1) and outside (200.200.201.2).The web server ip is 10.0.0.237. I have a static translation to 200.200.201.237.My access list is wide open...permit tcp any anypermit udp any anypermit icmp any ...

dmcdowall · 08-09-2007

Thanks Jon! The developers found a problem with their code. I've been pulling my hair out for nothing.

dmcdowall · 08-09-2007

Is there any way to set this up and still use 10.0.0.237 as the destination? I didn't think that would be possible since it's a private address?

dmcdowall · 08-09-2007

Thanks! This is being done in a lab environment now. We don't have a DNS server. The clients are going through two routers prior to the pix. When I take the pix out it works fine. The problem seems to occur once the address translation takes pla...

Member Since	‎08-08-2007 05:18 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	4

User Statistics

User Activity

PIX 515 w/WEB Server config

Re: PIX 515 w/WEB Server config

Re: PIX 515 w/WEB Server config

Re: PIX 515 w/WEB Server config