About ross.grierson

ross.grierson · 09-09-2007

HI All, we have a Cisco 3750 stack with 5 switches.It is made up of 2 x 3750 48 non POE (WS-3750-48TS) and 3 x 3750 POE with 4 SFP (WS-3750-48P). One of the POE is the master. We keep getting the error message (from the console) %ILPOWER-3-CONTROLL...

ross.grierson · 09-09-2007

Ok thanks fr your help, I will look at upgrading the IOS, what version would you think i should use? My company makes UPS and we have redundant PDU's, Cross Switch and dual UPS with generator backup so hopefully was not a power failure that has caus...

ross.grierson · 09-09-2007

I have also since restarting the stack (and having no problems) enabled the debug ilpower event and debug ippower controller and cannot see any problem. Maybe this is a config problem, but all ports are set to auto for ilpower.

ross.grierson · 09-09-2007

I rebuilt the stack without the switch that initially had the problem. The new master switch had the same problem. It is very strange. Do you think it could be a faulty batch of switches then? it just seems unlikely that there would be multiple ha...

ross.grierson · 09-09-2007

I initially thought it was a hardware problem, however it only occurs on the master switch in the stack, the other 2 x poe switches work ok, I rebooted the stack and powered on a different POE switch first to make it the master, this had the same pro...

ross.grierson · 09-09-2007

Ok, best to know the recommended route, I had to manually xmodem the IOS on one of the switches as it had become corrupt during the stack upgrade! i feel quite happy using the CLI but when upgrading the IOS on the entire stack i am a bit cautious!! ...

Member Since	‎09-09-2007 12:16 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	7

User Statistics

User Activity

Cisco 3750 Stacking Problems

Re: Cisco 3750 Stacking Problems

Re: Cisco 3750 Stacking Problems

Re: Cisco 3750 Stacking Problems

Re: Cisco 3750 Stacking Problems

Re: Cisco 3750 Stacking Problems