Hello guys,i have a operational ipsec tunnel between Cisco ASA 5505 and other firewall across my network. Traffic goes through in both direction. Now, i would like to source NAT ipsec incoming traffic (from ASA perspective) with its inside interface ...
I have changed rule order and it is working now:1 (outside) to (inside) source static remote interface destination static inside insidetranslate_hits = 46, untranslate_hits = 2502 (inside) to (outside) source static inside0 inside destination static ...
Thanks for your post Marius. This is the output from show nat: 1 (inside) to (outside) source static inside inside destination static remote remote no-proxy-arp route-lookuptranslate_hits = 51012, untranslate_hits = 2039892 (outside) to (inside) sour...
