Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Should an ACL on a VLAN interface be applied in-bound or outbound? If I want the network\VLAN(interface where the ACL is applied) to only inititate communcations to other VLANS-Hosts defined in my access list.
In device manager the SUP720 slot informs me"Unsupported Card" this is also the same with the10\100\1000 WS-X6748 GE TX module.I am running Ngenius 1.4, CS 2.2, DFM 1.2, CM 3.3, and RME 3.5 with all the latest IDU's installedPlease help?
I have installed re installed NGenius several times,Once install completes and using the carefully supplied password selected during install. I get to the Splash screen then when I click Login = "Login Unsuccesful, Could not access the NetScout serv...
I am running Ngenius 1.4 and recieve the above error message? Also, is Ngenius deliver any monitoring ability if you do not have a NAM installed?Tahnks in advance
Just getting started with LMS 2.2,1) I would like to have the capability to remotely manage the OS, is terminal services/RDP an option?2)Should Terminal services be removed prior to LMS install? or must I re do the entire install including IDU'sThank...
The card is visible in CV, however the SUP720 and WS-X6748 blade in white bold face font "Unsupported Card" just noticed in CV that this blade, WS-X6724 SFP blade, is being reported as Unsupported as well.I have SP9 for RTM, not sure where I can get ...
Thanks for the reply but,My Sup mod is a single blade(it dosent have daughter card\slot capacity)I remember from working with Cat 5000's that certain sups had the 1/2 slot(daughter card) on the Sup,but my 6500's do not have this.I currently have a 65...
