Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We are building a network for the balancing of a radius service using 6509 and CSM module (4.2.6).We are using the CSM in bridging mode (L2) between the server vlan and the client vlan.The service has some servers providing radius authentication (...
With Content Engines and CDN solution, we deployed a multicast station (for non-live contents). With the transaction logs we were able to log access to the first connection to the content-engine (as a http connection) but for our customer would be us...
Hi,Thanks for the answers,yes the two vlans are just switched on the catalyst, they enter into the routed process with the other layer-3 vlans.The default gw of the servers is the csm (the alias ip). We are totally sure there is not an asymmetric rou...
Rod,the CSM is the L2-gateway of the servers (we are using a bridging configuration, for design specs, you can see the conf).So, every packet should be intercepted from the CSM but the return traffic doesn't get changed on the source ip field.Yes, I ...
If you have connections to two ISPs, this is arouter problem, not a firewall problem, becausethe pix does not work as a router.So, you have to mix the two ISPs network onto arouter directly connected to them (say, GW).Then, what you have to do is sim...
You'd better read the PIX documentation athttp://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v52/index.htmanyway:1) I have installed several PIX-515 with 5.2(3) with little troubles up to now, but it dependson your applications. 2) fixup ...
