Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys We migrating from NXOS STP classic network to ACI. We have different Tenants that need to utilize the same VLAN. However when statically pathing ports in an EPG using port encap of vlan 811 ACI complains about it being used in another Tenant ...
Hi Guys I cannot access the alwayon sandbox for ACI, any ideas ? Also has the ACI VM simulator been removed or discontinued ? I really need to test some scripts
Guys
We are having multipod issues, in and EPG if have 2 routers on POD A as a static path they can communicate with each other, however when I have move router B to POD B and change the static path in the EPG they cannot communicate, does any have...
Hi Guys
Our company just purchased some ACI Kit recently
However the APIC is not discovery the leaf or spine, if I do a show lldp neighbor on the leaf it can see the APIC
I have disabled LLDP for the VIC
Perfromed the following on the APIC
acidia...
Hi Chris Thanks for the info, will definitely give this a try. Funny enough the first ACI testing I have done was based on your website and instructions you have on setting up ACI
Hi
As requested
IPN-1# sh cdp neighbors Capability Codes: R - Router, T - Trans-Bridge, B - Source-Route-Bridge S - Switch, H - Host, I - IGMP, r - Repeater, V - VoIP-Phone, D - Remotely-Managed-Device, s - Supports-STP-Dispute
Device-ID Local In...
Hi
We have 4 IPNs, 2 in POD A and 2 in POD B.
OSPF AREA 0.0.0.0 to the spines
Command output as requested
moquery -c fvBD -f 'fv.BD.name=="BD-Internet-Pub"' | grep bcastPbcastP : 225.0.56.0
225.0.56.0 appears on 3 of the IPNS
IPN1-PODA
(*, 225...
You are 100%. In my case the leaf shipped with firmware for APIC version 2.1 so I just upgrade to 2.1 and now my APIC has discovered my leaf and spines. I will add the other APICS, Spines and leaves next week
