Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, Can someone help me please.I have generated and used the python script generated from Yang Suite but with some modifications (please see "ospf_add_interface_v15.txt") to add Loopback100 interface under the OSPF100 process in area 0. The file ...
How can I make the following Traffic Engineering tunnel reflect the mtu values I configured below?Here is my computation:9004 (subif) - 14bytes etherhet header - 4 bytes vlan tags = 8986 available to IPThen 8986 - 4 bytes of mpls header = 8982 mpls m...
So I tried this on 7.2.1 and looks like the 6.3.1 is the issue, I did not see the extra tags on 7.2.1 when I do Get-Config additionally the Edit-config + Commit worked perfectly well. This was the request<rpc xmlns="urn:ietf:params:xml:ns:netconf:bas...
@miott Thanks for the response but can you comment on the discrepancy in the RPC generated between edit-config and get-config, specifically for the tags <running/> and <start/>.
I think I figured out what is going on.... Generating the RPC for "edit-config" from Yang Suite gives the below...<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101"><edit-config><target><candidate/></target><config><ospf xmlns="htt...
