Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I know the CSS is too old but I have one in production environment and I was asked if it is possible to CSS to make NAT from inside addresses and translate them into one external IP address to diferent kind of communications, for example: 172...
I am thinking of update my PIX 7.1(2) and ASA 7.1(2) for version 8.0.Someone know of some problems during or after the update?I saw some conversations in NetPro forum of specific problems like "sysopt no proxyarp outside" or "telnet problems" but non...
Hi people,I would like to know if it exist a command complement "show access-list" that it does not need to use a spacebar keyboard. My access-lists is big and all time I have see that to be using a keyboard to spacebar. Sorry my poor english.tha...
Hi scootertgm,I don't know how your configuration it's work but the access-list is wrong.You need this:access-list inbound permit tcp 10.6.228.160 255.255.255.240 host 10.6.128.220 eq (service_you_need)access-list inbound deny ip any 10.6.228.160 255...
I don't understand anything else.Your LAN is 10.6.128.220 or 10.6.228.160/28?Execute the command show "access-list" and look for "hit-counts" you will see which access-list are getting access.
Hi,let's see if I understood...Everything works, right?Your doubt is how you can access others IP address or other services that were not to be accessed by the address pool?Note that the access to the pool is very permissive (permit ip).
Hi,You know Cisco Security Advisories website?http://www.cisco.com/en/US/products/products_security_advisories_listing.htmlIn website exist a some versions of Cisco products with the vulnerabilities and how correct them. Your Pix version may have (at...
