I'm trying to understand how AVE VM two interfacesave-internal-1ave-internal-2VM adapters mapped to one single KNI interface(kni1) ? It looks like kni1 takes the MAC address of ave-internal-1. what happens to ave-internal-2 VM adapter? I don't see it...
For 3.1.1 ACI enhancement for flood in encapsulation on gen2 leaf switches, I'm seeing some weird flooding behavior with one BD and multiple EPGs in my packet capture.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_con...
how can I see EPG to physical domain association from APIC CLI?
show run tenant/ap/epg will show VMM association but nothing for physical domain association.
Hongjun
Hello, in APIC GUI AAEP entry, I can see which policy-group this AEP is attached to from "Operational" tab. I can't find such information from APIC CLI. Any suggestions?
anyone knows the CLI to check leaf nodes LPM-GST and LPM-LST?
I tried the following command but the output doesn't make too much sense to me.
module-1# show platform internal ns lpm globalGST EGRESS-------Printing for v4:tcam_anchor for Index: 0s...
Thank you @Marcel Zehnder and @RedNectar!
I do feel NX-OS CLI should cover these. API and moquery is powerful and can get down to the root of MO but you do have the learning curve of dealing with remember/cut/paste syntax, payload struct and progra...
yes, I always see an IBGP route for external default route.I guess my confusion is from this term "External LPM table" on ACI leaf, I thought this is a different table derived from routing table. I feel from your replies that "external LPM table = ro...
that's the part I'm trying to dig in.
If GST/LST is not used for external routes, then which command will show us the LPM table so we know how leaf nodes make decision to send the packet to the nearest VTEP next to the external router?
thank you. I'm trying to track down the packet lookup path from one local EP to external route learned through L3route.
the local EP send packet to leaf GW MAC and my understanding is that LPM global table should be checked. But I can't find the LP...
Thank you gbrait85! that's very helpful.
I played around a bit and also found these two commands which have some useful summary info.
9396-01# show tunnel internal database reachability
Reachability database:
vrf name: overlay-1, ip-address: 10.0...
