About mrjohnso

mrjohnso · 03-26-2007

I recently implemented an L3 content rule for Akonix IM filtering servers. Users have an ISA client that connects to an ISA server, the ISA server connects to the Akonix server, and the Akonix server connects to the destination IM. When the ISA -> ...

mrjohnso · 08-30-2010

I am also getting the license error message after upgrading to 4.2.1. I have not been able to find anything on it.

mrjohnso · 09-11-2009

Correct, you do not need WCCP compatability on the switch.

mrjohnso · 09-10-2009

You are correct, the WAE VLAN interface will be on the 3750. You are also correct that the WAE return traffic will use the same L3 link from the switch to the router. This *could* be a problem. However, using GRE/negotiated return from the WAE wil...

mrjohnso · 09-09-2009

Unfortunately I cannot open the file you posted. I cannot install the util needed to unpack the diagram.Your remote site sounds like it might be pretty small, so the non-Cisco router and switches might be all of the network hardware there? Is it po...

mrjohnso · 09-09-2009

Sorry, I should have mentioned with my recommendation that WCCP redirection would be configured on the WAN router. This would be standard WCCP configuration:ip wccp 61ip wccp 62int ip wccp 62 redirect inint ip wccp 61 redirect in* You can swap 61 a...

Member Since	‎03-26-2007 07:32 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	10

User Statistics

User Activity

CSS - Akonix IM filtering

Re: Routing loop detected and Licence error

Re: Question about WCCP in branch: L3 3750 switch behind WAN rou

Re: Question about WCCP in branch: L3 3750 switch behind WAN rou

Re: WAAS Design - Help

Re: Question about WCCP in branch: L3 3750 switch behind WAN rou