Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a site to site VPN set up. On the remote end is a Pix 501 3DES 10 user.Inside address is 10.25.99.1 and it is running dhcp for 10.25.99.10 thru 10.25.99.19. I only have 3 users behind that device. I have a network attached printer that ...
I have a remote site with DSL connection that gets a dynamic ip assigned. I want to set up my Pix 501-10user-3des at that end to connect to my vpn concentrator 3015 using a Lan-to-Lan, IKE preshared keys. Concentrator has a static public interface. ...
I have a shiny new Pix 501/10 user/3des. I have a remote site with a dsl connection that has a dynamic ip address from the ISP. I want to do a site to site ipsec 3des ike preshared keys tunnel to connect to my Concentrator 3015. I have the Cisco s...
That is exactly how I am set up. The only pingable addresses behind the pix 501 are the pc's that lease an address from the pix over dhcp. PC's on that subnet can ping everything inside the subnet, static or otherwise.
It took quite a bit of tinkering, but I did get it to work. My NAS is a Cisco VPN Concentrator 3015. The nice thing about it is that it gives you a gui where you can test against your radius server with an account and password. I had to put IAS on...
