About randall.potvin

randall.potvin · 03-02-2013

Hi folks,I recently upgraded the flash and the RAM on one of my ASA 5505 lab machines. The flash was upgraded from 128 to 512MB and the RAM was also upgraded from 256 to 512MB. I am using asa845-k8.bin. The firewall boots and runs file until you issu...

randall.potvin · 03-06-2013

I powered on the system and issued the recommended reload commands. The system hung on both reload attempts. I powered the system down and swapped the flash cards and powered the system up. It booted normally but failed to read to old flash. and whe...

randall.potvin · 03-06-2013

I am also thinking it may be the CF card. I'm going to put the old one back in tonight and I have ordered a new 512MB Cisco CF card. As soon as I receive it, I will try the new one.Thanks

randall.potvin · 03-06-2013

Yes, I can do a wri mem successfully.I'll try the suggested commands tonight and post the results.Thanks

randall.potvin · 03-05-2013

Same as before.=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.03.05 21:22:22 =~=~=~=~=~=~=~=~=~=~=~=enPassword: asa845# fsck flash:dosfsck 2.11, 12 Mar 2005, FAT32, LFN/dev/hda1: 54 files, 10723/63659 clustersfsck of flash: completeasa845# sho startup-confi...

randall.potvin · 03-04-2013

Yes, it says Rebooting..... and never reboots. I've left it for 6 hours just to see what would happen.I replaced the flash and RAM with Cisco flash and RAM.asa845# sho verCisco Adaptive Security Appliance Software Version 8.4(5) Device Manager Versi...

Member Since	‎03-02-2013 05:39 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

Can't reload ASA 5505 after flash and memory upgrade

Can't reload ASA 5505 after flash and memory upgrade

Can't reload ASA 5505 after flash and memory upgrade

Can't reload ASA 5505 after flash and memory upgrade

Can't reload ASA 5505 after flash and memory upgrade

Can't reload ASA 5505 after flash and memory upgrade