hi xandersection PPPOE:i can ping ipv6 from address LAN CPE to my loopback BNG, but outside of the BNG was RTO.default route CPE is from link-local BNG = fe80::e6c7:22ff:fe55:9683ping from cpe loopback address BNG
ping 200a:d1a::233 src-address=200a:...
Hi xander, beside the IPoE, i also deploying PPPoE dual stack in ASR9001. for IPv4 everything is working fine with my scenario. but for IPv6 i have a little problem. the subscriber have succeed to get IPv4 and IPv6 address. but seems like the IPv6 Tr...
hi xander, after i debug my router doesn't recieved the attribute. any idea why this is happened ?Cisco-avpair = "ipv4:default-ipv4-gateway=10.10.10.1"RP/0/RSP0/CPU0:Feb 11 11:39:10.286 : radiusd[1114]: RADIUS: Received from id 80 my_radiator_ip:164...
Hi Xander, i have upgrade my ASR9001 to version 5.1.1 but still i have no luck to give default-gateway to CPE.and the CPE has already receive IP address and Netmask from the Radius, only default-gateway that CPE doesn't recieved.radius user config:00...
Hi xander, im still not able to send default gateway from Radius to CPE using this attribute "ipv4:default-ipv4-gateway=<gateway>"I also looked the IOS-XR has release version 5.1.1, do you think is gonna work on newest version ?thank youAnderson