About darthbishop79

darthbishop79 · 03-16-2013

Hello,My name is Jay and I have a question on routing between two ASA'S....please allow me to explain the setup.In the office we have one ASA 5505 with a Base License connected to a Cisco 1800 ISP router and a 2960S Layer 2 Lan Switch.My supervisor w...

darthbishop79 · 04-25-2013

I have a question that applies but doesnt seem to be answered on this forum.What if I wanted to create an ACL to block lets say Telnet to a host to router that are on the same subnet, same vlan, inside, on an asa5505. I have disabled same security b...

darthbishop79 · 03-18-2013

Bingo,Julio you are right. I am having such an amatuer moment here, thank you for pointing this out.I have now made the e0/2 interface on the 5510 192.168.1.10 and I can ping it from my laptop that is connected through the 5505. I have only one pro...

darthbishop79 · 03-18-2013

I just ran this Packet Tracerbigred(config)# packet-tracer input inside tcp 192.168.1.1 echo 192.168.9.1 ec$Phase: 1Type: ACCESS-LISTSubtype:Result: ALLOWConfig:Implicit RuleAdditional Information:MAC Access listPhase: 2Type: ROUTE-LOOKUPSubtype: inp...

darthbishop79 · 03-18-2013

Production Lan office: Developement:ISP - Cisco 1800 modem | Pingable ASA 5505 -Base License ...

darthbishop79 · 03-18-2013

Julio, I can now ping the ASA's to each other. But I can't ping my 192.168.1.x to the subnet of the other ASA.Do I need to configure an access list?the asa 5505 is 192.168.1.1 and I created an inside interface on the 5510 as 192.168.9.1. I can ping...

Member Since	‎03-16-2013 05:01 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	7

User Statistics

User Activity

Routing between two ASA's possible?

Question regarding same security level ACLs

Re: Routing between two ASA's possible?

Re: Routing between two ASA's possible?

Re: Routing between two ASA's possible?

Re: Routing between two ASA's possible?