Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
You can provide resilience a number of ways with the CSS products and this enables it to provide many solutions - although you should look at using a later version of code than 4.01 - Check CCO for latest.The CSS can stick on SSL session id, but this...
Here is a script I have written for this - you can test as many ports as you want on one server with this script.To run just add under the service as:service testkeepalive type script socket-test.txt "172.17.10.10 8080 80 443" Hope this helps,Regards...
The CSS can load balance 'any' ip protocol with a layer3 rule. The only caveat is that the services assigned to the content rule must only have an icmp keepalive. If you specify a tcp port number as the keepalive, the CSS will perform the outbound na...
Yes, this is possible - just configure the CSS units in active / standby mode. Configure the Pri_CSS as the master and the Sec_CSS as the standby. The easiest way is to use the 'Full Redundancy' mode, using the 'ip redundancy' command. Just ensure th...
You will need to use Content Engines, rather than Cache engines at the remote sites, but yes this can be done. However, there is some work required on the Web site - any hyperlinks to media files that are to be distributed by the CDM, must include a ...
