Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 5 block range of ip's that our isp has given us. We use pat on the pix external address and use a static for the second ip in the range and both work fine. When I try to add a third static it doesn't work. No matter how I configure it I neve...
Syslog messages for just 192.168.1.5810/7/2007 11:45 Local4.Info 192.168.1.1 %PIX-6-302013: Built outbound TCP connection 138990 for outside:69.61.55.195/80 (69.61.55.195/80) to inside:192.168.1.58/51601 (129.X.X.182/51601)10/7/2007 11:45 Local4.Info...
Here is the show xlate with comments added. I'll add syslog shortly.PAT Global 129.X.X.178(443) Local 192.168.1.24(137)Global 129.X.X.182 Local 192.168.1.58 - static that doesn't workPAT Global 129.X.X.178(33789) Local 192.168.1.85(1935)PAT Global 1...
I make sure to do that each time. however the traffic still doesn't go through. Syslog shows syn timeout for the connection. pix-6-302014 I think for the error code. Looked and says something about DoS flood but that doesn't sound right.
