About rmaxson2

rmaxson2 · 03-06-2008

I get the same results pinging in eiter direction through the VPN tunnel (tunnel is working fine) below is a trace and included is the config.HO1ASA02# packet-trace input inside icmp 10.1.6.121 3 1 10.60.50.1 Phase: 1Type: FLOW-LOOKUPSubtype:Result: ...

rmaxson2 · 02-12-2008

I have the IPS set to promiscuous mode. Have a policy map set don't see it doing anything I get no reports or logs I see no traffic on it.How do you know what it's doing? or get it to do something?I don't even know what questions to ask as the docum...

rmaxson2 · 02-06-2008

I get an error..ERROR: Policy map global_policy is already configured as a service policy when I try to set up the IPS. How do I correct this config? --------Attempted Config Change-----------------HO1ASA01# conf tHO1ASA01(config)# access-list IPS p...

rmaxson2 · 01-31-2008

Is there a virus update file newer than 11/2005? I can't find one. Build Version: 6.0(3)E1Signature Definition: Signature Update S314.0 2008-01-22 Virus Update V1.2 2005-11-24

rmaxson2 · 01-30-2008

We have a pair of 5520s set as active/standby both have a AIP-SSM. Both AIP's are set to auto update the sig files so thats not an issue but what about the active detection? The primary IPS will have seen a lot of traffic that the failover IPS has no...

rmaxson2 · 02-07-2008

Great find! very helpful, seems Cisco needs better documentation on this device.

rmaxson2 · 02-06-2008

will give those a look, they are different from the other "Official Cisco" documents I've been using.

rmaxson2 · 02-06-2008

Got it, I was test editng the lines on my last config and put the map back in.. :(Still no traffic..

rmaxson2 · 02-06-2008

Still not seeing any traffic on the IPS.. besides setting a policy to route all traffic to the IPS what else needs to be done?** THIS IS A PRODUCTION BOX ** I can not guess or try anything that might knock it off line.

rmaxson2 · 02-06-2008

Ok the config still looks the same, but this time instead of an error I get a warning.WARNNING: Policy map global_policy is already configured as a service policyclass-map IPS-CLASS match access-list IPSclass-map inspection_default match default-insp...

Member Since	‎11-16-2007 08:10 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	37
Total Helpful Votes Received	3

User Statistics

User Activity

Blocked traffic flow..

ASA5520 IPS, not seeing any traffic

Config Global policy to use IPS (ASA 5520)

Virus update?

IPS failover with ASA5520

Re: Config Global policy to use IPS (ASA 5520)

Re: Config Global policy to use IPS (ASA 5520)

Re: Config Global policy to use IPS (ASA 5520)

Re: Config Global policy to use IPS (ASA 5520)

Re: Config Global policy to use IPS (ASA 5520)