Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to determine if there's a way to achieve the following: An 802.1x client authenticates onto the network. By virtue of the credentials we leverage the WLC's AAA override feature and redirect that client to a specified interface on the WLC. ...
While looking at client information from a pair of controllers on our NCS (version 1.3.0.20) I see what amounts to 53 different "Unknown" vendors listed among the clients. My question - Is there any way to update the OUI Vendor data in NCS to reflec...
As we transition buildings to our lightweight infrastructure we're installing new autonomous 1142 APs to fill in gaps and swapping out older 1242s with autonomous 1142s. What we're seeing is that some of these APs, running the latest IOS code availa...
My WLC has detected (via 15 detecting radios) a rogue AP with a client connected to it. The infrastructure has not determined that the AP is plugged into the local network. I'm trying to contain the AP - I classify it as "Malicious", update its sta...
We have a pair of 'legacy' 1310 bridges that serve as a backup radio link to our primary 1400 bridges. I updated the IOS on both root and remote bridges to 12.3(2)JA4. Subsequently, I see that the G radio interfaces of both bridges are down. Throug...
> if from @ourUNI.XXX then drop onto staff or student segment, if from visiting institute then to drop to guest. Definitely a viable solution to redirect clients onto our internal 802.1x network - which addresses access to internal resources. But we...
ISE is yet to be integrated into our environment. I'm not looking to provide an SSID so users can confirm that credentials work. The situation we're trying to address is as follows - our institution is a member of the Eduroam consortium. Subsequent...
All of our APs are powered by POE switches of different flavors. The AP's light appears to always be blue.Here's an example of one of the problem 1142s. System Software Filename: c1140-k9w7-tar.124-21a.JY System Software Version: 12.4(21a)JY...
I've tried all containing AP options - 1 thru 4. Doesn't make a difference. The AP goes into a "Contained" status for less than a minute then reverts to "Alert".The AP is definitely not ours. I did an OUI look up and its MAC address pops up as an...
