About Snakekick

Snakekick · 06-02-2017

Hello, i have a easy setup. an outside interface with the ip address 172.21.241.205 and a ssh server on the inside interface with the address 192.168.242.200 i create a network object : object network FileServerhost 192.168.242.200nat (inside,outsid...

Snakekick · 06-06-2017

thank you. the asa work. my server has a nic in the same subnet like the asa outgoing interface ;) thanks for you help now all work

Snakekick · 06-06-2017

but this look like some thing is still wrong Phase: 4Type: ROUTE-LOOKUPSubtype: Resolvecisco Result: ALLOWConfig:Additional Information:found next-hop 172.21.241.129 using egress ifc outside

Snakekick · 06-06-2017

Auto NAT Policies (Section 2)1 (any) to (outside) source static FileServer interface service tcp www www translate_hits = 0, untranslate_hits = 7 Manual NAT Policies (Section 3)1 (IB2_Private) to (inside) source dynamic any interface translate_hits ...

Snakekick · 06-06-2017

[toc:faq] sorry 80 is correct. IB4FW1# packet-tracer input outside tcp 172.21.241.22 1024 172.21.241.205 80 Phase: 1Type: ACCESS-LISTSubtype:Result: ALLOWConfig:Implicit RuleAdditional Information:MAC Access list Phase: 2Type: ROUTE-LOOKUPSubtype...

Snakekick · 06-06-2017

something is still not work :( sh nat Auto NAT Policies (Section 2)1 (any) to (outside) source static FileServer interface service tcp www www translate_hits = 0, untranslate_hits = 0 Manual NAT Policies (Section 3)1 (inside) to (IB2_Private) source ...

Member Since	‎06-01-2017 11:00 PM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	8

User Statistics

User Activity

Simple PAT/NAT on asa

thank you. the asa work.

but this look like some thing

Auto NAT Policies (Section 2

[toc on_off::hide=0 on_off:

something is still not work :