Acerca de romendra.chudal

romendra.chudal · 08-06-2018

Hi, We have multiple IE4000 that will have the same configuration. I configured one switch, saved the configuration to the SD card and moved the card over to the new switch and power cycled the switch. Now when I try to log on to the switch it gives ...

romendra.chudal · 08-13-2018

Would you be kind enough to share where that setting might be?Thanks,

romendra.chudal · 08-13-2018

Sorry for the late response. Haven't had a chance to test any of the stuff yet. But I will try it later today and report back. Also, thanks for the info on copying the config. If the config cannot be automatically loaded from the switch, I fail to un...

romendra.chudal · 08-09-2018

Ah, I will try that the first chance i get. I appreciate your input. One more question, if I was to take a SD card from a configured switch and plug it into a brand new switch, all the configuration should be copied over to the new switch automatical...

romendra.chudal · 08-08-2018

So ran another test. And similar results. I synced the flash with the SD card and I can see the HTML folder is in there yet, I cannot access the webpage. Instead I get the attached and when I click on the Web Console, i get a 404 message

romendra.chudal · 08-08-2018

I was kind of hoping that if the config.text file and the firmware was different that what already exists in the switch, then the switch would boot up to the new firmware and the config.text file. May be my thinking is wrong. Appreciate the time.

Miembro desde	‎06-23-2017 02:06 PM
Fecha de la última visita	‎08-15-2018 02:19 AM
Mensajes publicados	9

Estadísticas de usuario

Actividad del usuario

IE4000, moving configuration with SD card

Re: IE4000, moving configuration with SD card

Re: IE4000, moving configuration with SD card

Re: IE4000, moving configuration with SD card

Re: IE4000, moving configuration with SD card

Re: IE4000, moving configuration with SD card