Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone
I am having some issues with a Cisco ASA 5505 connected to the Comcast Modem/Router (Cisco DPC3941B). Every week (once a week) the ASA loses its outbound connection and I am having to Power Cycle the ASA and the Comcast Router.
At this...
Thank yo, Marvin
I have not tried connecting the computer directly to the Management Interface, I will do that and I will let you know the results.
FYI - I did the whole process again but before the usual steps I did the following
#sw-module module s...
Another tip:
In order to check the IMG in flash is copied ok I ran the command #verify /md5 disk0:/.... and of course I compared that hash checksum number with cisco.
I also checked the PKG in the FTP Folder
Thanks for answering me so quickly.
Like you said I have made all the steps. I have read the Cisco Guide, PeteLive Guide and some other guides and I have followed all the steps/instructions they give. You also can notice in my previous message when I...
Hi Marvin.
Even though sometimes I don't have a problem I like to read your answers in the blog to learn but this time I do have a problem:
...
I have the same problem.
Error 113 ...Upgrade Aborted
I have made all steps.
I first made the "reimage" co...
I have the same problem.
Of course I first make the "reimage" copying the IMG to Flash and running the commands
#sw-module module sfr recover configure image...
then
#session sfr console
and setup the network information in the sfr console, etc.
I h...
