HiJust purchased a cisco 837 router.The languarge off the IOS is coming up in either chinese,korean or japanese.How do I configure it to change to english language?
HiI have 2 companies on our Wide area network.They all come into the same core network.The problem I am trying to solve is that we have got a default route pointing to our firewall for all internet traffic.I need the the 2 companiees to use there own...
Hi AllPerhaps someone has seen this problem before.I have got a Layer 3 switch 3550 connecting to an Optical Laser unit at 2 buildings.When the laser connects to the switch with its utp cable the port does not come up when I use the Later versions of...
Hi I have got 2 new cat 3550 switches. I have got one at each building.I have it configured as a routed port on both switches.One port on each switch connected to a line of site laser. The problem I am having is that the port is not picking up the la...
Hi LeoPlease see below the show version output.Please note that I havew done everything that is in all the conversations.Do you think i might need to upgrade my PDM.This is a brand new pix firewall and has never been upgraded.NLONL02FIREWALL# sho ver...
Leo,Thanks again.I have done the commands as you requested.I then attempted to login again by typinghttps://10.98.7.250/pdm.htmlI then get prompted again with the security certificate message.It says that the date is valid etc but it still says the n...
Hi leoI appreciate your help on this.Thanks for the tip on the passwords.I was so stuck in my fault that I forgot to do that.I have followed your steps as you said.I type in the https://10.98.7.250/pdm.htmlIt then prompts me about the certificate.All...
Hi therePlease see my config and show version below.All I have changed on the pix is the inside ip address,clock and added in the username and password.i am running java 1.4.1_02 which is correct for internet explorer 6.After typing the username and ...