hi, i follow the step on cisco learning labs Cisco DevNet Learning Labs to active the NETCONF on NX-OS. and its successful.this is my output of getting list of YANG Files.
root@client:/python# ssh -p 830 admin@10.200.200.19 -s netconf
User Access Ver...
hi, i follow the step on cisco learning labs Cisco DevNet Learning Labs to active the NETCONF on NX-OS. and its successful.this is my output of getting list of YANG Files.
root@client:/python# ssh -p 830 admin@10.200.200.19 -s netconf
User Access Ver...
Hi everyone, I try to integerate Openstack that build with packstack (Centos) with OpenDayLight.this is my topology
Openstack Controller : 10.210.210.10 & 10.211.211.10
- eth1 : 10.211.211.10/24
- eth0 : 10.210.210.10/24
Openstack Co...
Hi everyone, I try to integerate Openstack that build with packstack (Centos) with OpenDayLight.this is my topology
Openstack Controller : 10.210.210.10 & 10.211.211.10
- eth1 : 10.211.211.10/24
- eth0 : 10.210.210.10/24
Openstack Co...
hello, i have some question to configure CSR 1K with OpenDayLightmy environment :OpenDayLight Boron SR2XE 16.04.01i have sucessful connect XE with OpenDayLight.
{
"node-id": "CSR1K",
"netconf-node-topol...
i think the problem is from the NX-OS Devices.NX-OS devices reply the Data Model with difference name structure.i try to compare the NX-OS hello message with CSR1000V hello message.NX-OS Hello
root@client:/python# cat capability-nx-os.txt
urn:ietf:p...
Hi Stuart, its my script error, or you doing same thing with your script?i try to manual download the YANG Files to opendaylight and try to reconnect the NX-OS to opendaylight. but its not working.i try to debug the opendaylight, and this error is ha...
hi, i have solve this problem.i have create external bridge in that example.so i decide to remove the external bridge configuration and let openstack configure the external network by self.