Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 1710 with a VPN config. I am using secure client 1.1 on the client end. From the client, I can ping to the server's internal IP address by IP(192.168.0.x), but cannot ping by server name. Also, I cannot connect to the server by IP address...
My ISP points their DNS server to 216.202.205.253 which will point back to our webserver (192.168.0.2). Here are the parameters of my pix 515outside: 216.202.205.250inside: 128.1.1.10DMZ: 192.168.0.1Here is my proposed DMZ config:global (DMZ) 1 192....
I have a PIX515, with three interfaces: outside, DMZ, and inside. Their is a current configuration in place with the exception of the DMZ, will install shortly. A new webserver will sit on the DMZ with nat to the server. Do I setup the DMZ interfa...
Thank you very much for your quick response. Let's assume the following:Outside: 215.202.205.250 255.255.255.248DMZ: 215.202.205.253 255.255.255.248inside: 129.1.1.10 255.255.255.0global (outside) 1 215.202.205.250nat (inside) 1 129.1.1.10 255.255....
