Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings, all. This is my first post, and I'm hoping someone can catch what my tired and forgetful eyes did not.Basic problem: We need to use a public IP to an internal serverSteps: 1 - Setup firewall, verify SSH inside and outside 2 - Set...
That did the trick, Jon. I'll have to study the books a bit more to understand this in depth, but you've rescued me from further angst over this...thanks!
Thanks, Jon. This is not a default route for traffic - we've got an MPLS link for that that feeds into a central internet location (single point of filtering,control, etc.) Only specific traffic needs to flow outbound here.Packet-Tracer results:Phase...
Thanks, Jon. Good catch on my alphabet challenge. Regarding #1, I added that. As for #2, here's a quick diagram: Comcast<----E0/0->ASA <--E0/1 (Access)----G1/0/48 (Access)-->Switch<---G3/0/49 (Trunk)----G0/0 (Trunk)--> RouterI added a route for the ...
