Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,For an ISDN connection in Japan, should I get an ISDN S/T or an ISDN U interface? ie: does the telco supply the NT1, or do I have to?Thanks for your help !-Matt
Hi all.Strange one: I am backhoming traffic from all of my customer's locations to a central location. When traffic going out to the public internet on port 80 arrives at that central location, I would like it to be redirected to another server on po...
Hi all.Strange one: I am backhoming traffic from all of my customer's locations to a central location. When traffic going out to the public internet on port 80 arrives at that central location, I would like it to be redirected to another server on po...
sorry - didn't see your reply before i reposted!you just need to make sure that you need to encapsulate.. if you set encapsulation to isl or something, you will only be able to communicate with hosts that are also running isl.. PC's won't be able to ...
Cisco only allows you to create FastEth subinterfaces if you're trunking VLANs..Best way to workaround it is to set the main interface up like this:interface FastEthernet 0 ip address 192.168.1.1 255.255.255.0 ip address 172.16.20.5 255.255.255.0 sec...
