About sunbeltadmin

sunbeltadmin · 07-28-2017

Created a STATIC NAT and Filter rule for a remote connection to our new phone system but can't seem to get it to work. any suggestions.

sunbeltadmin · 07-28-2017

Created a STATIC NAT and Filter rule for a remote connection to our new phone system but can't seem to get it to work. any suggestions.

sunbeltadmin · 08-01-2017

This was posted on another thread. for some reason it posted it twice... see this post. https://supportforums.cisco.com/discussion/13344171/asdm-64-asa-5505

sunbeltadmin · 07-28-2017

If we use a Cable Modem for our internet do i need to port forward on the modem to point to my outside interface?

sunbeltadmin · 07-28-2017

New Running Config Result of the command: "show running-config" : Saved:ASA Version 8.2(5) !hostname domain-name enable password passwd names!interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethern...

sunbeltadmin · 07-28-2017

i'm going to assume this worked... Result of the command: "packet-tracer input outside tcp 1.1.1.1 12345 xx.xx.xxx.xx 35400 detail" Phase: 1Type: UN-NATSubtype: staticResult: ALLOWConfig:static (inside,outside) tcp interface 35400 10.1.2.150 35400 n...

sunbeltadmin · 07-28-2017

I masked the outside interface IP : Saved:ASA Version 8.2(5) !hostname domain-name enable password passwd names!interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3 switchport access vlan 2...

Member Since	‎07-28-2017 10:24 AM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	7

User Statistics

User Activity

ASDM 6.4 for ASA 5505

ASDM 6.4 for ASA 5505

This was posted on another

If we use a Cable Modem for

New Running Config

i'm going to assume this

I masked the outside