Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,I have a question.I have a 7100 router that has some servers behind it. I need to translate each server to a public IP. The only thing is that between the outside world and the router is an ASA. We have a small data center where the ASA i...
Hi everyone,We are in the middle of upgrading from two PIX's to some new ASA5512X's. To give you some background on the situation we are upgrading these since the PIXs are fairly old. We had one extra that we had to use since one PIX has failed alrea...
Jouni,Thank you for the response.I will give that a try and see if it works! For the post 8.3 commands, the nat is in the global config area correct? Or is it under that object?Thank you,Derrick
Correct I am doing NAT currently on the 7100. I am trying to just pass the NAT translations though the ASA. Our situations is we have a small data center that we only have a few clients in at the moment. The ASA is our edge device, and is doing the r...
Patrick,Ok cool. One more question. With me statically natting our servers, can that be done with object NAT?Like:object network outside_server1_IPhost 70.x.x.xobject network server1host 192.168.1.50nat (inside,outside) static outside_IP
Patrick,Thank you for the reply! I will add those commands and change the config and see what happens. Also as for the ACLs, do you think those look correct? Like as in nothing should really be much of an issue with NAT/PAT?Thanks,Derrick
