Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am very new to Cisco ASA and I am trying many days to implement the design below but still cannot get it done. The situation I am facing is- a host (e.g. 192.168.5.10) under Inside interface can contact to outside without any problem.- however a ho...
Hi Jouni,Thanks a lot for your investigation. I have found the root cause. It is the IPS software on the host and after I disable it. Everything is working.Rott
Hi all,1. I thought the problem might be related to the network settings on the host like default gateway but I have tested by pinging from the host to outside (e.g. 10.90.147.250) and ping is working perfectly. It seems that outgoing traffic from ho...
Hello Jouni,Thanks for your advice, but I still cannot see the echo reply. What could be the reason?access-list INSIDE_IN_ACL extended permit icmp any anyaccess-list ICMP-CAP extended permit icmp host 10.90.147.250 host 192.168.5.10access-list ICMP-C...
Here is the result for both packet capture and packet tracer. Please advise# show capture OUTSIDE4 packets captured 1: 02:38:36.537829 802.1Q vlan#1 P4 10.90.147.250 > 10.73.5.130: icmp: echo request 2: 02:38:41.348767 802.1Q vlan#1 P4 10.90.147....
