About RMBaltzer

RMBaltzer · 03-06-2013

Hi,I have upgraded my SG200-08 switches from firmware version 1.0.5.1 to version 1.0.6.2. Since that new firmware is active, the network-printing from my Macbooks and iMacs is not working anymore. They all have TCP/IP connected network printers (not ...

RMBaltzer · 09-07-2013

Now we are six months further and there is still no fix available...Amazing how effective Cisco is responding to this issue, well done Cisco!

RMBaltzer · 05-12-2013

Hi Tom,My SG200-08 switch was working in factory defaults, and resetting again did not help.By the way, I do not have the SG200-08 switches anymore, I have replaced them for SG300 switches.But as you can see on this forum topic, I was not the only on...

RMBaltzer · 05-11-2013

It is very disappointing to see how things are taken up here by Cisco.This issue has been reported by me two months ago and there is still no action taken by Cisco as far as I can see.In the meanwhile there are more people who confirmed the issue, wi...

RMBaltzer · 04-02-2013

Hi Nagaraja,I have replaced my SG200-08 switches for SG300-10 switches, so I cannot test this anymore.Kind regards,Rene.

RMBaltzer · 03-29-2013

It would be nice if someone from Cisco could fix this problem.Several people have now confirmed this firmware issue.

Member Since	‎03-06-2013 06:08 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	8
Total Helpful Votes Received	5

User Statistics

User Activity

SG200-08 firmware issue

Re: SG200-08 firmware issue

Re: SG200-08 firmware issue

Re: SG200-08 firmware issue

SG200-08 firmware issue

SG200-08 firmware issue