Switches - Small Business

Namaste. I am writing to bring to your attention an urgent issue regarding a Cisco switch we purchased on January 23, 2025. Attached to this email, please find the invoice for your reference. Unfortunately, the device has stopped working. This equipm...

I got two C1300-12XS which i try to connect to each other via 10GB SFPs. The link wont come up between them. However if i plug in the same SFP and fiber cable to other equipment on one of the sides the link comes up without issue (tried to link from ...

Hi, I need archived firmware sx200_fw-1_3_7_18.ros for SG200-50 (EoL). Serial is out of support but I only need the intermediate file to upgrade. Portal rejects the case.

I obtained a SG500 for free and I want to use it in my home network to play around, learn things, etc. - This will never be exposed to the internet.Its running firmware 1.2.7.76 and I want to upgrade it to the latest, which will require multiple file...

Hi to everyone I am new here.I know that the SG200-18 has been EOL for a while, but I recently purchased one in good condition and I would like to update the firmware to the laste version.Does anyone have the files including the boot loader to upgrad...

I am a CCNA student and I recently bought a SGE2000 10/100/1000 Switch to play around with.  I set it up and but I am having a little difficulty getting into the switch to configure it.  This switch has  GUI so I opened my browser and typed in the de...

Switch reboot loop log as attachment fileActive-image: flash://system/images/image_cbs_ros_3.5.3.2_release_cisco_signed.binVersion: 3.5.3.2MD5 Digest: 8a9a5af0d6cf8fb48aeecedd721d0f39Then I disable dns server and no sntp named server, no pnp.Now no e...

device Cisco Business 350 CBS350-24P-4G that I turned on, but the power light is orange and all the ports are not working and I cannot reset it Is there a way to solve this problem?

I am having an issue with ports 1-4 and 25-28. It's kind of weird how these ports are showing off on PoE and they are lined up with one another on the switch. All other ports are enabled and show searching or on. The firmware is 1.2.1.5, which is the...

The operating voltage mentioned for the CISCO Power module PWR-C6-125WAC/2 is 100-240VAC.We would like to know what is the tolerance band for voltage above 240 240VAC. ( For example: +-5%, +-10%, etc.).This power module is used in CISCO L2 switches C...

My Device Meraki Mx64w is power issue detected Sr no Q2MN-RG8P-T6D8