Hi All,Here's the base setup:N5K, has a management IP of: 10.132.5.37 - is in the 'management' vrf, and has a default route for that vrf of 10.132.5.1.I can ping hosts in any of the ranges I'm trying to manage the switches from so connectivity is the...
Hey All,Interestingly enough I've seen about 3-4 posts with the exact same problem and yet not a single one is ever answered.. The task is simple:"username USER password 5 SOMEPASS role network-admin"It consistently outputs: "String failed to match t...
Hey all,So .. as of right now I have a pair of N5K's, down stream from them are from Fabric Interconnects and a UCS chassis. Upstream is a stack of 3750's then ASA5510's. I am trying to backup the config to our TFTP server and I am getting 'no rout...
Hi All,Not sure if this belonged in VPN discussion / Firewalling etc.. may try re-posting there if I get no bites here.I've been working on a config to test if users connecting via SSL VPN have AV of some kind installed on their system, and if not to...
Hi All,I'm working on a project and it's got me wading through miles of manual NAT (twice NAT) statements in an ASA 5510.. I'm looking at these things and going: WHY did this guy use twice NAT with destination?? .. here's a sample:Manual NAT Policies...
Hey Pille,Thanks so much for your help, it's been great! You know as simple as it is I didn't even think about the vty lines, everything kept centering around the physical interface 'mgmt0' so I just assumed the application would be on that interfac...
Awesome, thanks for your thorough response - makes a lot of sense seeing it that way. I still like how the 7k handles encryption better, but it's nice that this is there by default now. closing and adding ratings!Kindest Regards,ALAN
Hmm interesting. When I look at the required field after the 'password 5' it shows as a 'WORD' type.. so I figured this would more strongly encrypt the password that I input.. Can you give an example of using 'password 5'? Given that example how do...
For those that stumble across this thread:The basic host scanning extension does satisfy the needs stated above! The AEA and associated licensing is only if you want to alter/force certain settings.ALAN
Hey Reza,Awesome! You helped me connect the dots! When I copied the config to tftp this time I specific the management vrf and voila it worked. Still lots to learn but you've put me on the right path. Thanks so much, marking as correct answer ...
